Prince George Forklift Training School

Prince George Forklift Training School - Forklift Training School And Why It Is Really Important - CSA and OSHA establish criteria for forklift safety training that meets existing regulations and standards. Anyone planning to use a forklift is required to successfully finish safety training prior to using any type of forklift. The accredited Forklift Operator Training Program is meant to provide individuals training with the practical skills and knowledge to become an operator of a forklift.

There are forklift operation safety rules which should be followed pertaining to pre-shift checks, and regulations for lifting and loading.

An inspection checklist should be carried out and submitted to the supervising authority before beginning a shift. When a maintenance problem is uncovered, the use of the particular equipment must be stopped until the problem has been dealt with. To be able to indicate the machine is out of service, the keys need to be removed from the ignition and a warning tag placed in a place which is seen.

Safety rules for loading would include checking the load rating capacity on the forklift to determine how much the equipment could handle. When starting the machine, the forks should be in the down position. Remember that there is a loss of roughly one hundred pounds carrying capacity for every inch further away from the carriage which the load is carried.

In order to safely lift a palletized load, drive the forklift toward the pallet and stop with the fork three inches from the load. Level the mast until it is at right angles to the load. Lift the forks to an inch below the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to warn other workers. Do not allow forks to drag on the ground.

Click to Download the pdf